Installing Compressor/Condenser Line
WARNING: This page is about a different variant/trim than selected.
WARNING:
Refrigerant
- Danger of freezing
→ Avoid contact with refrigerant.
→ Wear personal protective gear.
→ Observe the safety regulations for working on air-conditioned vehicles and handling refrigerant.
→ Observe the safety regulations for extraction and filling systems.
→ Observe the instructions for repairing air-conditioning systems and storing spare parts.
Information
- Replace O-rings.
- Coat O-rings with refrigerant oil.
- Do not remove stoppers for lines and connections until shortly before installation.
- Installation is performed in reverse order.
- Screw in and tighten screw for refrigerant line at the air-conditioning compressor > Tightening torque 20 Nm (15 ftlb.)
- Screw in and tighten screw for refrigerant line at the condenser > Tightening torque 12 Nm (8.85 ftlb.)