Subsequent Work (V6 Biturbo)

WARNING: This page is about a different variant/trim than selected.

Install suction hoses.
1. 1.1 Screw-type clamp securing suction hose to air-cleaner cowl > Tightening torque 3.5 Nm (2.5 ftlb.) .
2. 1.2 Screw-type clamp securing suction hose to intake pipe > Tightening torque 3.5 Nm (2.5 ftlb.) .
Install drive belt for generator.
> WM, 137819 REMOVING AND INSTALLING DRIVE BELT
Check engine-oil level.
> CHECKING ENGINE-OIL LEVEL