Torque Support

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Torque Support Components Location With Torque Specification (V8 Turbo)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Torque support (shown on V8 Turbo)

1	Torque support
2	Replace screw, M10 x 70 + M10 x 80 > Initial tightening 50 Nm (36.9 ftlb.) > torque angle + 90°
3	Torque support bracket
4	Screw > Tightening torque 55 Nm (40.6 ftlb.)
5	Screws, M8 x 55 (V6 Turbo M8 x 45) > Tightening torque 23 Nm (17 ftlb.)