Engine Mount
WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
V6 engine mount
| 1 | Right engine carrier |
| 2 | Left engine carrier |
| 3 | Screws, M10 x 45/replace > Initial tightening 50 Nm (37 ftlb.) > Final tightening + 90° |
| 4 | Right engine mount |
| 5 | Left engine mount |
| 6 | Screw, M10 x 45 > Tightening torque 55 Nm (41 ftlb.) |
| 7 | Screw, M12 x 60 x 1.5 > Initial tightening 70 Nm (52 ftlb.) > Final tightening + 90° |