LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (19 - Engine - Cooling 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 197819 Removing And Installing Coolant Temperature Sensor (Radiator Outlet) >> Installing Coolant Temperature Sensor (Radiator Outlet)

Installing Coolant Temperature Sensor (Radiator Outlet)

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1 Biturbo only:  Screw in and tighten screw on screw-type clamp securing pressure hose to charge-air cooler > Tightening torque 5.5 Nm (4 ftlb.) +/- 0.5 Nm (0.3 ftlb.) 
    2. 1.2 Replace O-rings.
scientia non olet · About LEMON Manuals