LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (19 - Engine - Cooling 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 195819 Removing And Installing Coolant Regulator (Thermostat Insert) (V6 Turbo) >> Technical Values

Technical Values

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Location Des... Type Basic val... Toleranc... Toleranc...
Intake scoop to air-cleaner cowl Screw-type clamp Tightening torque 3.5 Nm (2.5 ftlb.)    
Intake pipe to intake scoop Screw-type clamp Tightening torque 3.5 Nm (2.5 ftlb.)    
Fastening screws securing coolant regulator to distributor housing M6 x 30 (3 ea.) Tightening torque 9 Nm (6.5 ftlb.)    
Screws for coolant pipes   Tightening torque 9 Nm (6.5 ftlb.)