LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (19 - Engine - Cooling 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 195019 Removing And Installing Coolant Pump (V6 Turbo) >> Concluding Work >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Secure air-conditioning compressor.

    > WM, 873419 REMOVING AND INSTALLING AIR CONDITIONING COMPRESSOR (Coupe) , WM, 873419 REMOVING AND INSTALLING ELECTRIC AIR-CONDITIONING COMPRESSOR (Wagon)

  2. Install the drive belt.

    > WM, 137819 REMOVING AND INSTALLING DRIVE BELT (V6)

  3. Only for V6 monoturbo: 

    Install intake distributor Centre.

    > WM, 244619 REMOVING AND INSTALLING CENTRE INTAKE-AIR DISTRIBUTOR (V6 MONOTURBO)

  4. Fill with coolant and bleed the cooling system.

    > WM, 193817 DRAINING AND FILLING COOLANT