LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (19 - Engine - Cooling 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 194519 Removing And Installing Additional Coolant Pump (Run-On) (V6 Turbo) >> Technical Values

Technical Values

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Location Des... Type Basic val... Toleranc... Toleranc...
Nut securing holder for additional coolant pump (castor)   Tightening torque 9 Nm (6.6 ftlb.)    
Double screw for additional coolant pump (castor) M6 x 14/M6 x 14 Tightening torque 9 Nm (6.6 ftlb.)    
Screws securing additional coolant pump (castor) to holder   Tightening torque 1.5 Nm (1.1 ftlb.)