Removing Motor For Cooling-Air Flaps

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Remove housing for cooling-air flaps -1- .
1. 1.1 Unscrew screws -2- .
2. 1.2 Loosen the top holder (2 parts) -3- and the bottom holder (2 parts) -4- from the housing for the cooling air flaps -1- .
3. 1.3 Remove housing for cooling-air flaps -1- .
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Housing for cooling-air flaps
Remove motor for cooling-air flaps -1- .
1. 2.1 Unscrew screws -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Cooling-air flap motor