Removing Cooling Fan Housing (Radiator Frame)
WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Electrically moved components
- Danger of limbs being trapped or severed
→ Switch off electric power to drive motor.
→ Make sure it does not switch on again.
→ Check that there is no electric charge.
- Disconnect electric line for the cover latch at the cooling fan housing.
- Release and disconnect electric plug connection for electric fan -1-
.
Electric plug connection
- Unclip electric plug connection -2-
from cooling fan housing (radiator frame) -3-
.
Electric plug connection
- Remove expansion rivets -1-
from air guide on cooling fan housing (radiator frame) -2-
.
Expanding rivets
- Disengage lower air guide -1-
from cooling fan housing (radiator frame) -Arrow-
and move it towards the engine.
Air guide
- Unscrew screws -1-
on cooling fan housing (radiator frame) -2-
and release the tab at the left and right -Arrow-
.
Cooling fan housing (radiator frame)
- Guide out cooling fan housing (radiator frame) -2-
by moving it downwards.
Cooling fan housing (radiator frame)