Installing Bellows For Steering-Gear Housing

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information

During fitting, make sure that the steering-gear housing bellows is not twisted and that the clamp lugs are easy to reach.

Fit inner clamp using > V.A.G 1275A - Hose clip pliers. > Inner clamp

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Inner clamp
Fit outer clamp -arrow- using > VAS 6890 - Spring Band Clamp Pliers.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Outer clamp