Technical Values: Overview
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Front lid to front apron (B1) | Gap dimension | 3.2 mm | + 0.8 mm | - 0.6 mm | |
|
Gap dimension |
|||||
| Front lid to front apron (B2) | Offset | Gap dimension | - 1 mm - 0.3 mm |
+/- 0.5 mm | |
|
Gap dimension |
|||||
| Front lid to wing (K1) | Gap dimension | 3 mm | +/- 0.7 mm | ||
|
Gap dimension |
|||||
| Front lid to wing (K2) | Offset | Gap dimension | 0 mm | +/- 0.5 mm | |
|
Gap dimension |
|||||
| Rear lid to roof/P-roof (R1) | Gap dimension | 4.5 mm | + 1 mm | - 0.2 mm | |
|
Gap dimension |
|||||
| Rear lid to roof/P-roof (R7) | Gap dimension | 4.8 mm | + 1 mm | - 0.2 mm | |
|
Gap dimension |
|||||
| Rear lid to roof/P-roof (R6) | Gap dimension | - 0.2 mm | + 0.8 mm | - 0.7 mm | |
|
Gap dimension |
|||||
| Rear lid to roof/P-roof (R8) | Gap dimension | - 2 mm | +/- 0.8 mm | ||
|
Gap dimension |
|||||
| Rear lid to side panel (R2) | Gap dimension | 3.5 mm | +/- 0.5 mm | ||
|
Gap dimension |
|||||
| Spoiler to side panel (R3) | Gap dimension | 3.5 mm | +/- 0.7 mm | ||
|
Gap dimension |
|||||
| Rear lid to side panel (R9) | Gap dimension | 4 mm | +/- 0.7 mm | ||
|
Gap dimension |
|||||
| Rear lid to rear apron (R4) | Gap dimension | 3.7 mm | +/- 0.8 mm | ||
|
Gap dimension |
|||||
| Rear lid to rear apron (R5) | Gap dimension | - 1 mm | +/- 0.9 mm | ||
|
Gap dimension |
|||||
| Front lid to wing (K1) | Gap dimension | 3 mm | +/- 0.7 mm | ||
|
Gap dimension |
|||||
| Front lid to wing (K2) | Offset | Gap dimension | 0 mm | +/- 0.5 mm | |
|
Gap dimension |
|||||
| Front wing to door (K3) | Gap dimension | 3.0 on 3.5 mm | + 0.7 mm | - 0.5 mm | |
|
Gap dimension |
|||||
| Front wing to door (K4) | Offset | Gap dimension | - 0.5 mm | + 0.3 mm | - 0.7 mm |
|
Gap dimension |
|||||
| Front wing to A-pillar (K5) | Contour | Gap dimension | 3.5 on >4.5 mm | +/- 0.9 mm | |
|
Gap dimension |
|||||
| Front wing to door entry guard (K6) | Gap dimension | 3 mm | +/- 1 mm | ||
|
Gap dimension |
|||||
| Front wing to door entry guard (K7) | Offset | Gap dimension | 0 mm | +/- 1.5 mm | |
|
Gap dimension |
|||||
| Windscreen to roof (W1) | Gap dimension | 2.5 mm | +/- 0.5 mm | ||
|
Gap dimensions from windscreen to roof |
|||||
| Windscreen to roof (W2) | Offset | -0.6 mm | +/- 0.5 mm | ||
|
Gap dimensions from windscreen to roof |
|||||
| Windscreen to panoramic roof (W2) | Offset | -0.6 mm | +/- 0.7 mm | ||
|
Gap dimensions from windscreen to roof |
|||||
| Rear window to rear lid (H1) | Gap dimension | 2.5 mm | +/- 1 mm | ||
|
Gap dimension from rear window to rear lid |
|||||
| Rear window to rear lid (H2) | Offset | Gap dimension | - 1 mm | + 0.8 mm | - 1 mm |
|
Gap dimension from rear window to rear lid |
|||||
| Rear window to rear lid (H3) | Gap dimension | 2.5 mm | +/- 0.5 mm | ||
|
Gap dimension from rear window to rear lid |
|||||
| Rear window to rear lid (H4) | Offset | Gap dimension | - 2.1 mm | + 0.8 mm | - 1 mm |
|
Gap dimension from rear window to rear lid |
|||||
| Rear window to rear spoiler (H5) | Gap dimension | 3.5 mm | + 1.5 mm | - 0.5 mm | |
|
Gap dimension from rear window to rear spoiler |
|||||
| Rear spoiler to rear window (H6) | Offset | Gap dimension | - 2.5 mm | +/- 1.5 mm | |
|
Gap dimension from rear window to rear spoiler |
|||||
| Front roof to sliding-roof panel (D1) | Gap dimension | 3 mm | +/- 0.9 mm | ||
|
Gap dimension |
|||||
| Front roof to sliding-roof panel (D2) | Offset | Gap dimension | 1.2 mm | +/- 0.9 mm | |
|
Gap dimension |
|||||
| Sliding-roof panel to rear lid (D3) | Gap dimension | 3 mm | +/- 0.9 mm | ||
|
Gap dimension |
|||||
| Sliding-roof panel to rear lid (D4) | Offset | Gap dimension | 0.5 mm | +/- 0.9 mm | |
|
Gap dimension |
|||||
| Rear spoiler to rear spoiler (H1) | Only for rear spoiler (wing) | Gap dimension | 3 mm | + 1.4 mm | |
|
Gap dimension from rear spoiler to rear spoiler |
|||||
| Rear spoiler to rear spoiler (H2) | Offset, only for rear spoiler (wing) | Gap dimension | 0 mm | +/- 0.5 mm | |
|
Gap dimension from rear spoiler to rear spoiler |
|||||
| Tail light to rear spoiler (H3) | Gap dimension | 1 mm | +/- 1 mm | ||
|
Gap dimension from tail light to rear spoiler |
|||||
| Tail light to rear spoiler (H4) | Offset | Gap dimension | > -10 mm | ||
|
Gap dimension from tail light to rear spoiler |
|||||
| Rear spoiler to logo trim (H11) | Gap dimension | 1 mm | +/- 1 mm | ||
|
Rear spoiler to logo trim |
|||||
| Rear spoiler to logo trim (H12) | Offset | Gap dimension | > -10 mm | ||
|
Rear spoiler to logo trim |
|||||
| Rear spoiler to rear lid (H7) | Gap dimension | 3 mm | + 1 mm | ||
|
Rear spoiler to rear lid |
|||||
| Rear spoiler to rear lid (H8) | Y offset | Gap dimension | 0 mm | +/- 0.5 mm | |
|
Rear spoiler to rear lid |
|||||
| Rear spoiler to rear lid (H9) | Z offset | Gap dimension | 0 mm | + 0.5 mm | - 0.8 mm |
|
Rear spoiler to rear lid |
|||||
| Rear spoiler (wing) to rear spoiler (H13) | Gap dimension | 3.5 mm | +/- 0.5 mm | ||
|
Gap dimension |
|||||
| Rear spoiler (wing) to rear spoiler (H14) | Gap dimension | 0.5 mm | +/- 0.5 mm | ||
|
Gap dimension |
|||||
| Rear spoiler (wing) to rear spoiler (H15) | Gap dimension | 3.5 mm | +/- 0.8 mm | ||
|
Gap dimension |
|||||
| Rear spoiler (wing) to rear spoiler (H16) | Gap dimension | 0.5 mm | +/- 0.5 mm | ||
|
Gap dimension |
|||||
| Rear spoiler (wing) to rear spoiler (H17) | Gap dimension | 3.5 mm | +/- 0.5 mm | ||
|
Gap dimension |
|||||
| Rear spoiler (wing) to rear spoiler (H18) | Running gap dimension | Gap dimension | 0.5 mm - 0.3 mm |
+/- 0.4 mm | |
|
Gap dimension |
|||||