Technical Values

Location	Des...	Type	Basic val...	Toleranc...	Toleranc...
Front lid to front apron (B1)		Gap dimension	3.2 mm	+ 0.8 mm	- 0.6 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Gap dimension
Front lid to front apron (B2)	Offset	Gap dimension	- 1 mm - 0.3 mm	+/- 0.5 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Gap dimension
Front lid to wing (K1)		Gap dimension	3 mm	+/- 0.7 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Gap dimension
Front lid to wing (K2)	Offset	Gap dimension	0 mm	+/- 0.5 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Gap dimension
Nuts securing upper part of lock to front lid	Item 1	Tightening torque	12 Nm (8.9 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Nuts securing upper part of lock to front lid
Nuts securing hinge to front cover	item 2	Tightening torque	20 Nm (15 ftlb.) (14.8 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Nuts securing hinge to front lid