LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Panamera Base >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 63 Bumper - Coupe -- 971 - PANAMERA (971) >> WM, 635719 Removing And Installing Rear Retaining Strip >> Installing Centre Retaining Strip And Retaining Strip For Tail Light

Installing Centre Retaining Strip And Retaining Strip For Tail Light

  1. Installation is performed in reverse order.
  2. Screw in and tighten nuts on retaining strip for tail light > Tightening torque 3.5 Nm (2.6 ftlb.) 
  3. Screw in and tighten nut on centre retaining strip at the bottom > Tightening torque 3.5 Nm (2.6 ftlb.) 
  4. Screw in and tighten nuts on centre retaining strip > Tightening torque 6 Nm (4.4 ftlb.) 
scientia non olet · About LEMON Manuals