Gap Dimension Of Rear Spoiler
| Location | Description | Type | Basic value | Tolerance |
|---|---|---|---|---|
| Rear spoiler to rear spoiler (H1) | Only for rear spoiler (wing) | Gap dimension | 3 mm | + 1.4 mm |
|
Gap dimension from rear spoiler to rear spoiler |
||||
| Rear spoiler to rear spoiler (H2) | Offset, only for rear spoiler (wing) | Gap dimension | 0 mm | +/- 0.5 mm |
|
Gap dimension from rear spoiler to rear spoiler |
||||
| Tail light to rear spoiler (H3) | Gap dimension | 1 mm | +/- 1 mm | |
|
Gap dimension from tail light to rear spoiler |
||||
| Tail light to rear spoiler (H4) | Offset | Gap dimension | > -10 mm | |
|
Gap dimension from tail light to rear spoiler |
||||
| Rear spoiler to logo trim (H11) | Gap dimension | 1 mm | +/- 1 mm | |
|
Rear spoiler to logo trim |
||||
| Rear spoiler to logo trim (H12) | Offset | Gap dimension | > -10 mm | |
|
Rear spoiler to logo trim |
||||
| Rear spoiler to rear lid (H7) | Gap dimension | 3 mm | + 1 mm | |
|
Rear spoiler to rear lid |
||||
| Rear spoiler to rear lid (H8) | Y offset | Gap dimension | 0 mm | +/- 0.5 mm |
|
Rear spoiler to rear lid |
||||
| Rear spoiler to rear lid (H9) | Z offset | Gap dimension | 0 mm | + 0.5 mm - 0.8 mm |
|
Rear spoiler to rear lid |
||||
| Rear spoiler (wing) to rear spoiler (H13) | Gap dimension | 3.5 mm | +/- 0.5 mm | |
|
Gap dimension |
||||
| Rear spoiler (wing) to rear spoiler (H14) | Gap dimension | 0.5 mm | +/- 0.5 mm | |
|
Gap dimension |
||||
| Rear spoiler (wing) to rear spoiler (H15) | Gap dimension | 3.5 mm | +/- 0.8 mm | |
|
Gap dimension |
||||
| Rear spoiler (wing) to rear spoiler (H16) | Gap dimension | 0.5 mm | +/- 0.5 mm | |
|
Gap dimension |
||||
| Rear spoiler (wing) to rear spoiler (H17) | Gap dimension | 3.5 mm | +/- 0.5 mm | |
|
Gap dimension |
||||
| Rear spoiler (wing) to rear spoiler (H18) | Running gap dimension | Gap dimension | 0.5 mm - 0.3 mm |
+/- 0.4 mm |
|
Gap dimension |
||||