Technical Values
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Drill bit | Diameter | 6, 6 mm | |||
| Drill bit | Diameter | 6, 6 mm | |||
| Drill bit | Diameter | 6, 6 mm | |||
| Applying adhesive | Spread out evenly | Application depth | 0.5 mm | ||
| Applying adhesive | Spread out evenly | Application depth | 0.5 mm | ||
| Applying adhesive | Application depth | 3 mm | |||
| Applying adhesive | Spread out evenly | Application depth | 0.5 mm |