Removing Front Roof Outer Section
- Drill through clinch points -A-
and punch rivets -B-
on front roof outer section.
- 1.1 Drill through clinch points -A- . > Bore diameter 4 mm
- 1.2 Remove punch rivets -B-
using > VAS 852 001 - Body Dent Removal System, Aluminium
and > VAS 6790 - Compact Booster
.
> 5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS
Punch rivets and clinch points
- Grind down welded seam.
Welded seam
- Heat bonding areas using > V.A.G 1416 - Hot-Air Blower
.
Bonding areas
- Remove front roof outer section.