Technical Values
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Dimension D | Distance from bore hole | 100 mm | |||
| Dimension E | Distance from bore hole | 235 mm | |||
| Dimension W | Distance | 40 mm | |||
| Dimension | Distance from bead | Distance | 160 mm | ||
| Dimension D | Distance from bore hole | 100 mm | |||
| Dimension W | Distance | 40 mm | |||
| Applying adhesive | Apply evenly over the entire bonding surface | Application depth | 0.5 mm | ||
| Applying adhesive | Apply evenly over the entire bonding surface | Application depth | 0.5 mm | ||
| Applying adhesive | Apply evenly over the entire bonding surface | Application depth | 3 mm |