LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Panamera Base >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 50 - Body Front (971 Wagon) >> 5038 Lock Support Panel >> WM, 503819 Removing And Installing Lock Carrier >> Installing Lock Carrier

Installing Lock Carrier

  1. Installation is performed in reverse order. Pay particular attention to the following:

    Screw in and tighten screws for headlight mounting: > Tightening torque 5.5 Nm ((4 ftlb.) 

    Screw in and tighten screws securing reinforcement to module carrier. > Tightening torque 20 Nm ((15 ftlb.) 

    Screw in and tighten screws securing radiator to lock carrier. > Tightening torque 13 Nm ((9.5 ftlb.) 

    Screw in and tighten screws for front bumper. > Tightening torque 50 Nm ((37 ftlb.) +/- 15 % 

    Screw in and tighten screws for lock carrier. > Tightening torque 6 Nm ((4.5 ftlb.) 

scientia non olet · About LEMON Manuals