Technical Values
TIGHTENING TORQUE SPECIFICATIONS
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Marking side member | Dimension X | Distance | 17 mm | ||
| Drill bit | Diameter | 4.7 mm | |||
| Drill bit | Diameter | 8 mm | |||
| Applying adhesive | Spread out evenly | Application depth | 0.5 mm | ||
| Applying adhesive | Spread out evenly | Application depth | 0.5 mm | ||
| Bead of adhesive | Application depth | 5 mm | |||
| Threaded joint on connecting piece | Tightening torque | 9.5 Nm (7 ftlb.) | +/- 1 Nm (0.5 ftlb.) |