Supply Line - Section At High-Pressure Pump
WARNING: This page is about a different variant/trim than selected.
Overview of fuel system
| 1 | High-pressure pump |
| 2 | Supply line - section at high-pressure pump |
| 3 | Union nut |
| 4 | Fuel pressure sensor |
| 5 | Supply line - engine compartment section |
| 6 | Spring band clamp |
| 7 | Plug-in coupling |
| 8 | Supply line - underbody section |
| 9 | Fuel tank |
| 10 | Retaining straps for fuel tank |
| 11 | Stud |
| 12 | Nut |
| 13 | Screws for fuel tank retaining straps |
| 14 | Screws for filler neck |
| 15 | Filler neck cap |
Fig 2: Supply Line On High-Pressure Pump Component Location With Torque Specification (Supply Line - Section At High-Pressure Pump)
Supply line on high-pressure pump
| 1 | Supply line section at high-pressure pump |
| 2 | Supply line section in engine compartment |
| 6 | Screw > Tightening torque 9 (6, 5 ftlb.) Nm |
| 7 | Line bracket |
| 9 | Nut > Tightening - torque 9 Nm (6.5 ftlb.) |