LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan T >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (19 Engine - Cooling 2.9L -- 95B - MACAN (95B)) >> WM, 196119 Removing And Installing (Engine) Coolant Pipe (V6 Turbo) >> Installing Coolant Pipe (Engine) >> Installing Coolant Pipe For Coolant Pump

Installing Coolant Pipe For Coolant Pump

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Replace gaskets.
    2. 1.2  Screw in and tighten screws.
      1. Tightening torque 9 Nm (6.5 ftlb.) 
scientia non olet · About LEMON Manuals