Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screws for coolant pipes | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Screws for coolant pipes | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Screws securing pulley to coolant pump | M6 x 10 (4 ea.) | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Screws securing coolant pump to engine block | M6 x 20 (7 ea.) | Initial tightening | 9 Nm (6.5 ftlb.) | ||
| Screws securing coolant pump to engine block | M6 x 20 (7 ea.) | Final tightening | 9 Nm (6.5 ftlb.) |