LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan T >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (19 Engine - Cooling 2.9L -- 95B - MACAN (95B)) >> WM, 194019 Removing And Installing Coolant Reservoir (V6 Turbo) >> Installing Coolant Reservoir

Installing Coolant Reservoir

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Tighten screw on coolant reservoir.
      1. tightening torque 8 Nm (5.9 ftlb.) 
    2. 1.2  Tighten screw on air inlet housing cover.
      1. Tightening torque 3.5 Nm (2.5 ftlb.) 
scientia non olet · About LEMON Manuals