Checking Antifreeze In Coolant
WARNING: This page is about a different variant/trim than selected.
WARNING:
Hot fluid
- Danger of scalding
- → Avoid contact with hot fluid.
- → Wear personal protective gear.
- Unscrew coolant expansion tank cap carefully -1-
.
Cap on coolant reservoir
- Check antifreeze content.
Checking antifreeze content
- 2.1 Check antifreeze content using antifreeze tester -1- .
- 2.2 If the antifreeze content is above -35°C, correct it by increasing the proportion of pure coolant as required.
Coolant mixture ratio
- 40% coolant and 60% distilled water for antifreeze protection up to -25°C
- 50% coolant and 50% distilled water for antifreeze protection up to -36°C
Measured antifreeze protection in °C Antifreeze quantity to be added (in litres) - 5 9 - 10 8.5 - 15 7.5 - 20 7 - 25 5 - 30 3.5 - 35 1.5 - Tightening coolant expansion tank cap -1-
.
Cap on coolant reservoir