Technical Values: Notes
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Compressor/valve unit holder to underbody | M8 thread | Tightening torque | 20 Nm (15 ftlb.) | ||
| Pressure lines to valve block | Union nuts | Tightening torque | 3.5 Nm (2.5 ftlb.) | ||
| Pressure line to compressor | Union nut | Tightening torque | 3.5 Nm (2.5 ftlb.) |