Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screws for transmission control unit | M6x45 | Initial tightening | 8 Nm (6 ftlb.) | ||
| Screws for transmission control unit | M6x45 | Final tightening | + 90° | ||
| Screw securing ATF filter housing to transmission | Tightening torque | 10 Nm (7.5 ftlb.) | |||
| Screw for ATF connector housing | Tightening torque | 8 Nm (6 ftlb.) |