LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan T >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (38 Automatic Transmission Gears Control 2.9L -- 95B - MACAN (95B)) >> WM, 387719 Removing And Installing Control Mechanism For Transmission >> Subsequent Work >> Notes

Subsequent Work: Notes

WARNING: This page is about a different variant/trim than selected.
  1. Install ATF pan.

    > 375519 - REMOVING AND INSTALLING ATF PAN

  2. Fill in ATF

    370235 Checking and topping up ATF 

  3. Connect the battery.

    > 270619 - REMOVING AND INSTALLING VEHICLE ELECTRICAL SYSTEM BATTERY

  4. Calibration after removing and installing the control mechanism: 

    Calibrate control mechanism for transmission using the PIWIS Tester. 

    1. 4.1  Overview F12  PDK F12  Maintenance/repairs F12  Calibration after removing and installing  mechatronics F12 
    2. 4.2  Follow the instructions on the PIWIS Tester F12 
    3. 4.3  Start the calibration process by pressing
    4. 4.4  Erase fault memory.
scientia non olet · About LEMON Manuals