LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan T >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (28 Ignition System, PREGLOW System 2.9L -- 95B - MACAN (95B)) >> WM, 287219 Removing And Installing Knock Sensor (V6 Turbo) >> Installing Knock Sensor

Installing Knock Sensor

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
  1. 1.1  Tighten screw on knock sensor.
    • Tightening torque 30 Nm (22 ftlb.) (22.1 ftlb.) 
scientia non olet · About LEMON Manuals