LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan T >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (26 Exhaust System 2.9L -- 95B - MACAN (95B)) >> WM, 267319 Removing And Installing Catalytic Converter (V6 BITURBO) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Secure oxygen sensor downstream of catalytic converter.
    1. > 247319 - REMOVING AND INSTALLING OXYGEN SENSOR DOWNSTREAM OF CATALYTIC CONVERTER (V6 BITURBO)
  2. Install heat shield.
    1. WM, 261219 REMOVING AND INSTALLING HEAT SHIELD (V6 TURBO) 
  3. Install cross panel.
    1. > WM, 508119 REMOVING AND INSTALLING CROSS PANEL (DISASSEMBLING PLENUM PANEL)
  4. Install front strut.
    1. > 408619 - REMOVE AND INSTALL FRONT STRUT
  5. Install engine cover (design cover).
    1. WM, 108319 REMOVING AND INSTALLING ENGINE COVER (DESIGN COVER) (V6 TURBO)
  6. Install cover for front underbody.
    1. WM, 519219 REMOVING AND INSTALLING COVER FOR FRONT UNDERBODY
scientia non olet · About LEMON Manuals