Preliminary Work

WARNING: This page is about a different variant/trim than selected.

Remove cover for front underbody.
1. > WM, 519219 REMOVING AND INSTALLING COVER FOR FRONT UNDERBODY
Remove engine cover (design cover).
1. WM, 108319 REMOVING AND INSTALLING ENGINE COVER (DESIGN COVER) (V6 TURBO)
Remove front strut.
1. WM, 408619 REMOVE AND INSTALL FRONT STRUT
Remove cross panel.
1. WM, 508119 REMOVING AND INSTALLING CROSS PANEL (DISASSEMBLING PLENUM PANEL)
Remove heat shield.
1. WM, 261219 REMOVING AND INSTALLING HEAT SHIELD (V6 TURBO)
Loosen oxygen sensor downstream of catalytic converter.
1. WM, 247319 - REMOVING AND INSTALLING OXYGEN SENSOR DOWNSTREAM OF CATALYTIC CONVERTER (V6 BITURBO)