LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan T >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (21 Exhaust Gas Turbocharging 2.9L -- 95B - MACAN (95B)) >> WM, 213919 - Removing And Installing Molded Hose (V6 BITURBO) >> Preliminary Work >> Preliminary Work For Upper Molded Hoses

Preliminary Work For Upper Molded Hoses

WARNING: This page is about a different variant/trim than selected.
  1. Remove the front bumper.
  2. Remove air guide for charge-air cooler.

Preliminary work for lower molded hoses 

  1. Remove front underbody cover.
scientia non olet · About LEMON Manuals