LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan T >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (13 Engine - Crank Drive, Pistons 3.0L -- 95B - MACAN (95B)) >> WM, 137319 Removing And Installing Belt TENSIONER (Generator) (V6 Turbo) >> Install Belt TENSIONER Damper (Generator)

Install Belt TENSIONER Damper (Generator)

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Fit in and tighten new  screws.
    • Initial tightening 8 Nm (6 ftlb.) 
    • Final tightening + 45° 
scientia non olet · About LEMON Manuals