Preparing Connection Areas Of The Body For Installing Rear Side Member (Section)
WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
- Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive.
- The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed.
- Do not begin bonding work until all materials and tools necessary for later repair work are available.
- Align contact surface and connections of the body.
- De-burr connection points.
- Prepare marked areas for installation.
Connection areas
| LHD vehicle | Bonding and resistance spot-welding |
Connection areas
| LHD vehicle | Bonding and resistance spot-welding |
| RHD vehicle | Bonding and riveting |
| Item C | Full steel welding |