Removing Rear-End Well
WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
Loosen connection points on one side only. Do not damage the sheet-metal panel underneath.
- Drill out spotwelds using > VAS 882 001 - spotweld remover
.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Rear-end well
- Remove rear-end well.