Preparing Connection Areas Of The Body For Installing Rear-End Well

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information

Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive.
The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed.
Do not begin bonding work until all materials and tools necessary for later repair work are available.

Align the sealing surface and connections of the body.
De-burr connection points and prepare them for welding.
Prepare the marked area for resistance spot-welding.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Connection areas of body