Identifiable Deformations On The Body Structure
WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Visual inspection of the structural parts for creasing and bending, starting from the point of impact toward the centre of the vehicle
- Visual inspection of the structural parts at the joints for gaping panel joints (e.g. entry area at the side member under the rubber seal of the door)
- Check the body structure using an electronic measuring system (e.g. > VAS 6526/11 - Measuring Unit, Professional or > VAS 811 019 - Measuring system ).
- Decide whether the vehicle is technically repairable
- Decide whether the vehicle is economically repairable
Repair vehicle, if necessary.