Pressing Out Punch Rivets
WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
The following description is intended only as a guide. A description of the steps involved and the various areas of application can be found in the operating instructions provided with the respective device.
Information
The pressed-out punch rivet remains in the panel to be replaced and is removed together with the panel. Punch and bottom die pairs
| Punch rivet | Pressing punch rivet joints out of two-layered panel joints with restricted access | D3 + D5 |
| Pressing punch rivet joints out of three-layered panel joints with restricted access | D4 + D5 | |
| Pressing punch rivet joints out of two-layered panel joints | S4 + D5 | |
| Pressing punch rivet joints out of three-layered panel joints | S5 + D5 |