WM, 5X00IN22 Working With Body Foam Filler: Notes
WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
TECHNICAL VALUES SPECIFICATION
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Minimum processing temperature | 000.043.305.59 | Minimum temperature | 15 °C | ||
| Maximum processing temperature | 000.043.305.59 | Maximum temperature | 28 °C | ||
| Foam filler bonding | 000.043.305.59 | Processing time at 15 °C | 20 min | ||
| Foam filler bonding | 000.043.305.59 | Processing time at 28 °C | 15 min | ||
| Minimum hardening temperature | 000.043.305.59 | Minimum temperature | 15 °C | ||
| Maximum hardening temperature | 000.043.305.59 | Maximum temperature | 28 °C | ||
| Assembly and endurance strength | 000.043.305.59 | Hardening time at 28 °C | 3 h | ||
| Assembly and endurance strength | 000.043.305.59 | Hardening time at 15 °C | 5 h |