LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan T >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (5X - Body General) >> WM, 5X00IN20 Working With Body Structural Foam >> Working With Body Structural Foam >> Preparing Bonding Surfaces >> Cleaning

Preparing Bonding Surfaces: Cleaning

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Then, clean the bonding flange areas using a lint-free cloth soaked in isopropanol or acetone until there are no more residues on the cloth.

Leave cleaned surfaces to dry off for 15 minutes; the bonding surfaces must be completely dry.

scientia non olet · About LEMON Manuals