Cover For Centre Underbody
WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance |
|---|---|---|---|---|
| Screws securing central cover for centre underbody to body | Item 1 | Tightening torque | 2.5 (1.75 ftlb.) Nm | |
|
Central cover for centre underbody |
||||
| Screws securing central cover for centre underbody to gear support | Item 2 | Tightening torque | 3.5 (2.5 ftlb.) Nm | |
|
Central cover for centre underbody |
||||
| Nuts securing right heat shield to body | Item 1 | Tightening torque | 2.5 (1.75 ftlb.) Nm | |
|
Right heat shield |
||||
| Screw securing right heat shield to body | Item 2 | Tightening torque | 2.5 (1.75 ftlb.) Nm | |
|
Right heat shield |
||||
| Screws securing cover for centre underbody at the right to body | Item 4 | Tightening torque | 2.5 (1.75 ftlb.) Nm | |
|
Cover for centre underbody at the right |
||||
| Nuts securing cover for centre underbody at the right to body | Item 5 | Tightening torque | 2.5 (1.75 ftlb.) Nm | |
|
Cover for centre underbody at the right |
||||
| Screws securing side cover at the rear to body | Item 7 | Tightening torque | 2.5 (1.75 ftlb.) Nm | |
|
Side cover at the rear |
||||
| Nuts securing holder to body | Item 1 | Tightening torque | 2.5 (1.75 ftlb.) Nm | |
|
Holder |
||||
| Nuts securing left heat shield to body | Item 1 | Tightening torque | 2.5 (1.75 ftlb.) Nm | |
|
Left heat shield |
||||
| Screws securing cover for centre underbody at the left to body | Item 3 | Tightening torque | 2.5 (1.75 ftlb.) Nm | |
|
Cover for centre underbody at the left |