LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan T >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (55 - Lids, Flaps) >> WM, 558719 Removing And Installing Upper Part Of Rear Lid Lock >> Installing Upper Part Of Rear Lid Lock

Installing Upper Part Of Rear Lid Lock

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tighten screws to > Initial tightening 8 (6 ftlb.) Nm  .

    Tighten screws to > Final tightening 45 °  .

    Fit new screws. 

scientia non olet · About LEMON Manuals