Installing Actuating Cylinder For Rear Lid
WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order. Pay particular attention to the following:
Check that the safety clips are engaged correctly. Safety clip must be placed directly on the head of the actuating cylinder for the rear lid.
Plug in electric plug connection until it engages securely.
- Push safety clip on fully as far as its end position
Fitting the safety clip