LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan T >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (55 - Lids, Flaps) >> WM, 557319 Removing And Installing Actuating Cylinder For Rear Lid >> Function Test On Rear Pneumatic Springs

Function Test On Rear Pneumatic Springs

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open and close the rear lid several times to check that the actuating cylinder for the rear lid is working properly and was fitted correctly.
  2. Open the rear lid fully. The two fitted actuating cylinders for the rear lid must hold the rear lid open.
  3. Close the rear lid.
scientia non olet · About LEMON Manuals