Installing Front Lid Hinge
WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
- Some of the repair illustrations show only one side of the vehicle or a similar component.
- Naturally, some steps also have to be performed on the opposite side of the vehicle as well.
- Installation is performed in reverse order. Pay particular attention to the following:
Tighten screws to > Tightening torque 20 (15 ftlb.) Nm .