Preliminary Work
WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
Use a marking pen to mark the position of accessories with respect to each other before removal in order to reduce the amount of adjustment work required for gaps and joints.
- Remove front lid.
- Remove upper part of lid lock.
> 551819 REMOVING AND INSTALLING UPPER PART OF FRONT LID LOCK
- Remove front lid seal.
- Remove front logo.
>*** 660719 Removing and installing front logo
- Remove insulation from lid at the rear.
>*** 700419 Removing and installing insulation for front lid