Removing Lower Part Of Front Lid Lock
WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
- The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment.
- The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant.
- Some steps must be carried out automatically.
- Some of the repair illustrations show only one side of the vehicle.
- Unscrew the screws -1-
from front lock lower part -2-
and pull the front lock lower part -2-
up and out.
Front lock lower part
- Loosen lower part of front lid lock.
Front lock lower part
- 2.1 Unclip microswitch on front lock lower part -Arrows- .
- 2.2
Remove operating cables -2-
on front lock lower part.
- 2.2.1 Unclip operating cables -2- on front lock lower part.
- 2.2.2 Disengage ball joints -1- for the operating cables -2- from front lock lower part.
- Remove front lock lower part.