Removing rear section of operating cable for front lid lock

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information

Assembly aid:

To make it easier to install the cable, secure a cord, for example, to the operating cable for the front lid lock and use it to pull the cable through.

Unclip rear section of operating cable for front lid lock -1- from the bracket -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Rear section of operating cable for front lid lock
Unclip rear section of operating cable for front lid lock -2- from clip -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Rear section of operating cable for front lid lock
Unclip rear section of operating cable for front lid lock -1- from release unit -2- and disengage it.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Release unit for operating cable for front lid lock
Guide out rubber sleeve -1- at the body and press rubber sleeve -1- inwards -Arrow- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Rubber sleeve
Lubricate rear section of operating cable for front lid lock -1- and pull it out towards the passenger compartment -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Rear section of operating cable for front lid lock