Removing front section of operating cable for front lid lock

Information 

• The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment.
• The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant.
• Some steps must be carried out automatically.
• Some of the repair illustrations show only one side of the vehicle.

1. Remove sound absorbers -1-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Sound absorbers

2. Unscrew screws -1-  and remove release element -2-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Release mechanism

3. Loosen cover -4-  from the holder -2-  and unclip front section of operating cable for front lid lock -1-  from the bracket -3-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Cover on bracket

4. Unclip deflection unit -1-  on the lock carrier and remove front section of operating cable for front lid lock.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Deflection unit for lock carrier