LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Macan T >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (55 - Lids, Flaps) >> WM, 551019 Removing And Installing Front Lid Release >> Installing Front Lid Release

Installing Front Lid Release

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tighten screw to > Tightening torque 2.5 (1.75 ftlb.) Nm  .

scientia non olet · About LEMON Manuals